We Cannot Log You on Control Account Info an Advanced Settings and Try Again

Windows seven Enterprise Windows vii Abode Basic Windows 7 Habitation Premium Windows 7 Professional person Windows seven Starter Windows seven Ultimate More...Less

Symptoms

In the Windows seven "Organization and Security" control console category, the Action Center lets you change User Account Control (UAC) settings. In the User Account Command Settings dialog box, you motion the slide bar command for notifications, and then you click the OK push button. In this scenario, the dialog box does not close, and no change is fabricated. When the mouse pointer is positioned on the OK push button, and yous printing ENTER, the dialog box withal does not close, and no change is made.

Note If you click Cancel, the dialog box closes and no change is made, every bit expected.

Resolution

This issue occurs when Microsoft Part 97 is installed on Windows 7. The installation of Function 97 makes a alter to the registry that causes this issue.

To accept united states of america set up this problem for you, get to the "Ready information technology for me" department. To re-enable the prompt back yourself, go to the "Allow me set information technology myself" section.

Gear up it for me

To set the prompt automatically, click the Prepare it button or link. Click Open in the File Download dialog box, so follow the steps in the Fix information technology wizard.

Note If Role 97 is reinstalled, this problem occurs once more. In this scenario, y'all must reapply this gear up.

Let me fix it myself

Important This section, method, or task contains steps that tell you how to alter the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that yous follow these steps carefully. For added protection, back up the registry earlier y'all modify information technology. And then, you can restore the registry if a problem occurs. For more information near how to support and restore the registry, click the post-obit article number to view the article in the Microsoft Knowledge Base:

322756 How to back up and restore the registry in Windows

To resolve this issue, change the registry setting. To do this, follow these steps:

1. Click Start, type
   notepad in the Search box, and so press ENTER.

2. Copy and then paste the following text into Notepad:

   Windows Registry Editor Version five.00
   [HKEY_CLASSES_ROOT]
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCC5-4E68-101B-A2BC-00AA00404770}]
   @="IOleDocument"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCC5-4E68-101B-A2BC-00AA00404770}\NumMethods]
   @="6"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCC5-4E68-101B-A2BC-00AA00404770}\ProxyStubClsid32]
   @="{A4A1A128-768F-41E0-BF75-E4FDDD701CBA}"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCC6-4E68-101B-A2BC-00AA00404770}]
   @="IOleDocumentView"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCC6-4E68-101B-A2BC-00AA00404770}\NumMethods]
   @="16"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCC6-4E68-101B-A2BC-00AA00404770}\ProxyStubClsid32]
   @="{A4A1A128-768F-41E0-BF75-E4FDDD701CBA}"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCC7-4E68-101B-A2BC-00AA00404770}]
   @="IOleDocumentSite"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCC7-4E68-101B-A2BC-00AA00404770}\NumMethods]
   @="4"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCC7-4E68-101B-A2BC-00AA00404770}\ProxyStubClsid32]
   @="{A4A1A128-768F-41E0-BF75-E4FDDD701CBA}"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCC8-4E68-101B-A2BC-00AA00404770}]
   @="IEnumOleDocumentViews"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCC8-4E68-101B-A2BC-00AA00404770}\NumMethods]
   @="7"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCC8-4E68-101B-A2BC-00AA00404770}\ProxyStubClsid32]
   @="{A4A1A128-768F-41E0-BF75-E4FDDD701CBA}"
                         
   HKEY_CLASSES_ROOT\Interface\{B722BCC9-4E68-101B-A2BC-00AA00404770}\NumMethods]
   @="vi"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCC9-4E68-101B-A2BC-00AA00404770}\ProxyStubClsid32]
   @="{A4A1A128-768F-41E0-BF75-E4FDDD701CBA}"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCCA-4E68-101B-A2BC-00AA00404770}\NumMethods]
   @="5"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCCA-4E68-101B-A2BC-00AA00404770}\ProxyStubClsid32]
   @="{A4A1A128-768F-41E0-BF75-E4FDDD701CBA}"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCCB-4E68-101B-A2BC-00AA00404770}]
   @="IOleCommandTarget"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCCB-4E68-101B-A2BC-00AA00404770}\NumMethods]
   @="5"
                         
   [HKEY_CLASSES_ROOT\Interface\{B722BCCB-4E68-101B-A2BC-00AA00404770}\ProxyStubClsid32]
   @="{A4A1A128-768F-41E0-BF75-E4FDDD701CBA}"
                       

3. Save the file as a registry file on your desktop with the proper name UAC.reg.

4. On your desktop, double-click UAC.reg, and then click Yes when you receive the following bulletin:

   
   Practice you want to allow the following program to brand changes to this calculator?
   Programme name: Registry Editor
   Verified publisher: Microsoft Windows
   Yes No
   

5. Click Yes when you lot receive the following message:

   Adding information can unintentionally modify or delete values and cause components to stop working correctly. If you practise not trust the source of this data in
   path\UAC.REG, do not add information technology to the registry.

   Are y'all sure you want to continue?
   Yes No

6. Click OK when you receive the following message:

   
   The keys and values independent in
   path\UAC.reg have been successfully added to the registry.
   OK

Note If Office 97 is reinstalled, this trouble occurs over again. In this scenario, you lot must reapply this registry file.

More Data

You are notified by UAC before changes that require ambassador-level permissions are fabricated to a reckoner. To change the UAC settings, follow these steps:

1. Click Start, and so click Command Panel.

2. ClickSystem and Security.

   

3. In the Action Middle category, clickAlter User Account Command Settings.

   

4. In the User Account Control Settings dialog box, move the slider control to select a dissimilar level of control between Ever notify and Never notify.

   

5. ClickOK to save the alter.

For more than information about the UAC feature, visit the post-obit Microsoft website:

http://windows.microsoft.com/en-US/windows-vista/Your-permission-please-Understanding-User-Account-Command-in-Windows-Vista Back up for Office 97 expired on February 28, 2002, and support for Office 97 Service Pack 2 expired on January 16, 2004. For more than information, visit the following Microsoft website:

http://www.microsoft.com/windows/compatibility/en-us/Default.aspx?blazon=Software

Need more help?

normanhadity.blogspot.com

Source: https://support.microsoft.com/en-us/topic/you-cannot-change-user-account-control-uac-settings-on-windows-7-54aeb896-884b-3a9a-b580-3125a807c3fc

Share this post